|
Sales - Service - Parts Technical Support, Trackside
consulting, Damper and Data Acquisition Seminars, |
|
|
Hyperco Helper Springs, Spring Spacers and
SpringDividers
A helper spring is used to minimize the chance of the main spring coming out of its perch when the suspension is fully extended. Note that a divider is usually required to keep the helper and main springs in alignment. The pictures below show a helper on the left and a divider on the right.
Hyperco offers two lengths, 4" and 6", of helper spring for 2.5" ID springs one length for each of 2.25", 3" and 60 mm springs. Hyperco offers a divider for 2.5" ID only.
Genesis Technologies also offers 1" and 2" spring spacers as well as spring dividers for 2.25" and 2.5" springs:
